Screen Burn-in Test & Dead Pixel Checker
Click the preview screen below to enter fullscreen. Inspect 50% & 20% Gray (plus 5%–10% dark gray via the fullscreen slider), White Screen, Pure Black, and RGB / Yellow channels for burn-in, image retention, banding, and pixel defects.
- Dim room lights, disable Night Shift / True Tone / Eye Comfort filters, and set brightness to 50%–80% (or 30%–50% for dark-room Black & 20% Gray checks).
- Select 50% Gray to spot faint OLED burn-in shadows and DSE, or 20% Gray (and the fullscreen 0–255 slider) to check near-black vertical banding.
- Cycle through White, Black, Red, Green, Blue, and Yellow to inspect color tinting, backlight bleed, and dead or stuck subpixels.
- Tap anywhere or press Esc to exit fullscreen. Temporary image retention and some stuck LCD subpixels may respond to pixel cycling; permanent OLED burn-in cannot be reversed by software.
Spotted temporary image retention or a stuck LCD subpixel? Run uncompressed color-cycling patterns to clear trapped charge. (Note: permanent OLED emitter burn-in cannot be reversed by software.)
What Each Full-Screen Test Pattern Reveals
50% & 20% Neutral Grayscale
Under standard gamma 2.2, 50% gray (#808080) emits ~22% optical luminance—exposing faint UI burn-in shadows and LCD dirty screen effect (DSE) without glare or OLED ABL dimming. 20% gray (#333333, ~3% luminance) operates OLED driving transistors at low current where vertical banding and Mura stand out.
Full-Field White Screen
Outputs rgb(255, 255, 255) across active color channels. Best suited for checking spatial white-point uniformity, warm yellow tinting caused by faster blue OLED emitter aging, off-axis pink or green optical coating shifts, pronounced burn-in shadows, and dark dead pixels.
Pure Black Screen (0, 0, 0)
Cuts self-emissive OLED drive current to zero in a dark room, so any glowing pinpoint indicates a leaking stuck subpixel. On IPS, VA, and Mini-LED LCDs, pure black distinguishes fixed bezel backlight bleed from angle-dependent IPS corner glow and local-dimming haloing.
RGB & Yellow Subpixel Isolation
Tests pure Red, Green, and Blue channels alongside dual-channel Yellow (R+G, Blue off). Pinpoints individual dead or stuck subpixels and isolates blue-channel OLED degradation from red and green wear caused by static status bars, social-app icons, and game HUDs.
How to Run an Accurate OLED Burn-in & Uniformity Test
Designed for OLED, AMOLED, QD-OLED, Mini-LED, IPS, and VA LCD phones, monitors, laptops, and TVs
Disable Color Filters & Set Brightness
Wipe dust off the glass while powered off, dim room lights, and disable Night Shift, True Tone, Night Light, Eye Comfort Shield, and auto-brightness. Use 50%–80% brightness for gray/color checks, or 30%–50% in a dark room for Black and 20% Gray.
Inspect Grayscale, White, Black & RGB
Click the test canvas above to enter fullscreen. Check 50% Gray for UI shadows, use 20% Gray (and drag the fullscreen 0–255 slider down to 5%–10% dark gray) for vertical banding, then cycle White, Black, RGB, and Yellow.
Distinguish Retention from Permanent Wear
Rest the display or run dynamic pixel cycling to clear reversible charge retention—and on OLED TVs or monitors, run the built-in hardware Pixel Refresher first. Permanent OLED emitter burn-in and dead pixels are physical wear that software cannot reverse.
Screen Burn-in vs. Image Retention, Banding & Pixel Defects
How to identify what you see on screen based on display physics and subpixel behavior
| Display Artifact | Best Test Pattern | Underlying Physical Cause | Reversible? |
|---|---|---|---|
| Permanent OLED Burn-in | 50% Gray, Blue, White | Cumulative electrochemical efficiency loss in heavily driven organic emitters (status bars, TikTok icons, taskbars, HUDs). | Irreversible hardware wear. Built-in TV/monitor Pixel Refreshers recalibrate TFT compensation; software cannot restore lost emitter output. |
| Temporary Image Retention | 50% Gray, 20% Gray | Reversible charge trapping / threshold-voltage hysteresis in the TFT backplane or ionic drift in LCD liquid crystal layers. | Reversible. Fades with screen-off rest, varied content, or dynamic RGB color-cycling patterns. |
| Dead Pixel vs. Stuck Subpixel | White & RGB (dead) · Pure Black (stuck) | Dead pixel: unpowered open transistor (dark dot). Stuck subpixel: non-switching LCD cell or leaking transistor (bright R/G/B dot on black). | Dead pixels are permanent. Stuck LCD subpixels sometimes respond to rapid RGB voltage cycling. |
| Vertical Banding, Mura & DSE | 20% Gray & 5%–10% Slider | Tiny spatial variations in OLED TFT threshold voltage at near-black current, or uneven LCD diffuser/backlight layers (DSE). | Manufacturing panel trait. Faint near-black OLED banding in pitch-dark tests often settles slightly after initial panel compensation cycles. |
| Backlight Bleed vs. IPS Glow | Pure Black (dark room, 30%–50% brightness) | Bleed: physical bezel pressure leaking LCD edge light. IPS glow: off-axis polarizer light leakage inherent to IPS panels. | IPS glow shifts when you move your head (normal); edge bleed stays fixed to the frame. |
Screen Burn-in, Gray Uniformity & Dead Pixel Test FAQ
How do I run an accurate screen burn-in test on my phone, monitor, or TV?
First turn off warm display filters (Night Shift, True Tone, Windows Night Light, or Android Eye Comfort Shield) and auto-brightness so software color shifts do not mimic OLED aging. In a dimly lit room, set brightness to 50%–80%, enter fullscreen above, and start on 50% Gray. Check high-wear static UI regions—status bars, bottom gesture bars, TikTok/Reels buttons, keyboards, and OS taskbars—then inspect 20% Gray, Pure Black, White, RGB, and Yellow.
Why are 50% and 20% gray more sensitive than pure white for OLED burn-in and banding?
Under a gamma 2.2 response curve, 50% gray (#808080) produces ~22% optical luminance and 20% gray (#333333) produces ~3%. Full-screen 100% white creates visual glare in the eye and triggers OLED Automatic Brightness Limiting (ABL), masking subtle 1%–3% luminance drops—so white is mainly best for spotting yellow or pink chromaticity shifts. Mid-tone 50% gray aligns with peak human contrast sensitivity (Weber-Fechner law) for faint burn-in shadows and LCD dirty screen effect (DSE), while 20% dark gray (and 5%–10% via the fullscreen slider) drives OLED pixel transistors near their threshold voltage where vertical banding appears.
How can I tell temporary image retention apart from permanent OLED burn-in?
Both appear as faint, stationary translucent silhouettes on neutral gray backgrounds. Temporary image retention comes from reversible capacitive charge trapping in the thin-film transistor (TFT) backplane or ionic polarization in IPS LCD panels; turning the screen off for 15–30 minutes or running dynamic color cycling clears it. Permanent burn-in is cumulative chemical degradation of the organic light-emitting materials themselves and remains locked in place indefinitely.
What is the difference between a dead pixel and a stuck subpixel?
A complete dead pixel receives no power and remains a sharp black dot across White, Red, Green, and Blue screens (whereas a single dead subpixel appears black only on its own primary color and tinted on White). A stuck subpixel remains energized—glowing red, green, blue, or yellow against Pure Black (0, 0, 0). Stuck liquid-crystal subpixels on LCDs can occasionally be freed via rapid color switching, whereas dead pixels are permanent.
What does the Yellow screen test reveal on OLED and AMOLED displays?
Yellow — rgb(255, 255, 0) — drives Red and Green subpixels while keeping Blue off. Because higher-energy blue OLED emitters (~2.6–2.7 eV) generally age faster than red and green, comparing Pure Blue against Yellow and White isolates channel wear: if a ghost outline is clear on Blue (and warm yellow on White) but absent on Yellow, degradation is confined to blue subpixels; if visible on Yellow too, red or green emitters are worn.
Are faint vertical lines on dark gray normal on OLED, and should I test with a phone camera?
Minor vertical banding on 5%–20% dark gray slides in a pitch-dark room is common on WOLED and QD-OLED panels due to microscopic backplane transistor tolerances; if you cannot see it in normal dark scenes, the panel is healthy. Avoid judging uniformity through a smartphone camera—automatic Night Mode and high ISO dramatically exaggerate faint Mura and IPS glow far beyond naked-eye visibility.
Can software fix screen burn-in or ghost icons found during this test?
No web tool or app can chemically restore degraded organic emitters or revive dead pixels. On OLED TVs and monitors, always run the manufacturer’s built-in Pixel Refresher / Panel Care utility first, which measures transistor drift and updates hardware voltage compensation. Browser pixel-cycling tools like our Screen Burn Fixer (/launch/) render uncompressed RGB transitions to help dissipate temporary image retention and exercise stuck LCD subpixels; prolonged high-brightness cycling only softens permanent burn-in edges by aging surrounding pixels.
Download the official Android app for one-tap screen diagnostics and background repairs
